====== Creating a deliverable ======

To create a deliverable:

  - open the **Deliverables** interface {{:fr:phasage:2026-03-11_15h00_55.png?20|}}
  - click the **Add** button located at the bottom of the left panel {{:en:phasing:2026-03-13_10h47_45.png?60|}}

The configuration depends on the type of deliverable you want to create.

-----

===== Creating a phasing booklet =====

To create a **phasing booklet**:

{{:fr:phasage:2026-03-11_15h01_37.png?900|}}

  - Select **Phase** in **Generate sheets by**
  - Check the desired **sub-project(s)**
  - Select the desired hierarchy levels. Each checked **Phase** will create a dedicated page.
  - Select the **default plan + print area**, then click **Create sheets**
  - Review, reorganize or delete sheets. It is also possible to adjust the **plan used for each sheet**. Click **New booklet**.

-----

===== Detailing phases =====

Phases can be detailed over time.

Example: creating a **weekly detailed booklet** for **Phase 2** of the project.

Procedure:

{{:fr:phasage:2026-03-11_15h01_51.png?900|}}

  - Select **Phase** in **Generate page by**
  - Check the desired **sub-project(s)**
  - Select the relevant phase and define the **time interval** used to detail that phase
  - Click **Create sheets**
  - Review and adjust the background plan if necessary for each sheet. The process can be repeated to add additional sheets afterward.

-----

===== Creating sequential sheets =====

It is also possible to create a detailed booklet
by specifying a time period.

To define a start and end date:

  - Click **Date** in the upper left section
  - Define a **period** and an **interval** for the sheets
  - Click **Add**

Once all pages have been added, click **New booklet**.

Optionally:

It is possible to add several sequences one after another.
To do so, follow the same procedure as above. Before clicking
**New booklet**, choose new parameters and click
**Create sheets**. When all sequences have been added,
click **New booklet**.

-----

===== Managing sheets =====

Several operations can be performed on sheets:

  * **Delete a sheet** – select the sheet and click **Delete**
  * **Change sheet order** – use **drag and drop**